This Outdoor 2-Light LED Security Floodlight with Motion Sensor in Bronze floods pre-wired and assembled on universal CU4 EZ plate. Accepts PAR-38 lamps, 150 watt max. Lamps not supplied. UL listed: Suitable for wet locations. Surge protection: Withstands up to 6000 volts. Voltage: 120 volts AC 60 Hz. Time adjustment: 5 seconds to 12 minutes. Senses 180 degree and 360 degree down for Total Detection. Power consumption: 1 watt. Photoelectric control: Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications. Switching capacity: 8 amps, 1000 watts incandescent at 120 volts. RF immunity: Circuits fully shielded for maximum radio frequency immunity. No extra wiring needed. Advanced detection logic: Minimizes false triggers. Color matched lens: Dark lens with bronze units, white lens with white units. Temperature compensation: Sensitivity adjusted automatically for consistent detection in hot and cold ambient temperatures. Wide sensitivity control: Adjustable from 100-percent to 30-percent . Evening timer: Keeps lights on for 1-8 hours after dusk. Then sensor is motion activated until dawn. Scanning leds: 3 LEDs continually scan back-and-forth. Set it and forget it: STL360's full coverage pattern reduces need for aiming and adjustment. Customized press apply lens mask included to reduce coverage easily. Patents: RAB sensor and fixture designs are protected under U.S. and International Intellectual Property laws. Outdoor 2-Light LED Security Floodlight with Motion Sensor in Bronze Senses 180 degree out + 360 degree down for total detection Scanning LED's Radio frequency immunity; 6000 volt surge protection 1000 watt switching capacity Pre-wired and pre-assembled on CU4 universal EZ plate; protected manual override with auto reset; can be wired in parallel Dimensions: 13.2 x 10.2 x 6.4 inches Weight: 4lbs.